Slightly fold the iGates® on the bottom tip lengthwise and insert to the depth of the snow line indicator. Straddle the gate between both feet/skis, downhill or uphill depending on the COMBO color you choose. Fill with the Inflator until it shuts off automatically. One push ON. The fill-tip unit must be in a paired state with the inflator to turn on.

2 Fill

The inflation system pressure is preset and will shut off automatically once it reaches the correct inflation pressure inside the gate. Push the ON button on the inflator once to start the inflation sequence. AUTO shut off.

It is important to keep the inflator inside the backpack for moisture protection. The backpack is always included.

Ensure the fill hose exits at hip height on your left or right side to use maximum hose length. Hold the fill tip with your right or left hand to insert into the fill-valve, hold the iGate® with your left or right hand behind the fill-valve.

Wait for the auto shut off function to end! Full required pressure must be reached for proper function of iGates®.

20psi. 1,38 bar.  Pre set.

Close the fill-valve plug immediately.

Batteries for the inflator not included. Conveniently use the superior DeWalt DCB 206 or 606, 6 Ah 20/60V battery. This battery also matches the DeWalt Drill. It can easily fill 160+ iGates® on one charge. Fill time approximately 6-8 seconds. All battery imitations/Fakes are inferior, don't waste your money.

Use CR2050 battery for the fill-tip control. Remove the hose from the inflator and together with the battery carry it in your carry-on lugage. No need to remove the button battery this way, for travel by air.
Available world-wide.

NOTE: Our inflator is for iGates® use only. No other application is authorized.